New Hose and Tube Test Fixture
Hoses and Tubes with a variety of end forms may be tested using the New TW130
Fixture from WEH.
Assemblies that require pressure test, function test, leak test or simply flushing can be clamped speedily either by pneumatic push button actuation or by a fully automated system whereby the introduction of the test piece actuates the sealing piston. A wide variety of test media can be used including water
and helium. Standard units have a maximum working pressure of 450 Bar, higher
pressures are available for special applications. The fixtures are constructed
in hard anodised aluminium with stainless steel sealing pistons.
Typical applications include hydraulic hoses, power steering hoses, tubular
assemblies and high pressure gas bottle regulators.
For more information contact Weh GmbH on:
New Hose and Tube Test Fixture
|
|