Cagil's third edge milling machine has been delivered to Noksel and Mounted on their wilson byard spiral mill.

• no chip problem,
• edge copying system by clamping the strip edge from three point Separetly.
• cutter head diameter : 630 mm.
• capacity : 25 mm from each side while x70 strip is moving 1.6 m/m
• noise is less than 80 db.
• x or y welding edge and its parameters can be set from the screen Panel by operator and machine adjust the position of strip Automatically.
• all movements can be done automatically or under the control of Operator from operator panel.
• machine delivered as ready to work complete with hydraulic, mcc and Operator panels.
• chip conveyor is mounted on the machine.

Cagil's first two EMM are working at ASWP Co / Colombia / SC USA since aogust 2000.

For further information please contact:

Cagil Makina A.S.
- Addr: Ankara yolu 5.km. P.K.:47 19001 CORUM, Turkey
- Tel: +90 364 235 01 40
- Fax: +90 364 235 01 39
- WWW: http://www.cagilmakina.com
- Email.
- Contact: Osman Baki Cagil