|
Camtek United Kingdom
- Programming Multi-Axis Lasers give you a headache?
PEPS SolidCut Laser software relieves the pain.
Supplied internationally, the PEPS SolidCut CADCAM solution is a modern CADCAM system delivering easy creation of complex toolpaths for CNC laser cutting equipment, with full simulation and collision detection for perfect CNC code.
With extensive and powerful solids-based geometry, customers also benefit from an impressive set of Integrators for leading CAD solutions, many of them free with the system.
Locate your local supplier on our website.
- Tel: +44 1684 892290
- Fax: +44 1684 892269
- Email:Click here
- Contact: Carol Hart
TubeExpert Germany
- - Revolutionary add-on CAD/CAE-modules for the whole process-chain from tube-design to tube-manufacturing. -integrated with your CAD-system.
- Tel: +49 (0)6171 910 -274
- Fax: +49 (0)6171 910 -275
- Email:Click here
- Contact: Chris Leistritz
3R Solutions Germany
- Advanced pipe design software
- Design and planning
- Construction
- Simulation of pipe bending
- Workshop automation
- Statistics and evaluations
- Tel: +49-2381-688-272
- Fax: +49-2381-688-273
- Email:Click here
- Contact: Sales Dept
data M Software + Engineering GmbH Germany
- The COPRA Tube Design and COPRA FEA RF Software solutions.
Services for:
* tube mill roll design
* Trouble shooting and optimisation
Hardware for quality control
* Software supply
* FEA Analysis Services
- Tel: +49 8024 640-0
- Fax: +49 8024 640-300
- Email:Click here
- Contact: Albert Sedlmaier
TubeExpert USA CA United States
- Innovative Virtual Reality Tube Design Software reduces designtimes by 90% and leads to better, productionready design. Bending Simulation allows for offline production optimization.
- Tel: 805-642-7424
- Email:Click here
- Contact: Jay Drake
EZ Pipe Software CA United States
- Attention: Workers in pipefitting, maintenance welding, drafting, engineering. With EZ Pipe software, you can print custom pipe patterns in about 5 minutes. You can have a professional fit with no gaps, and the exact angle that you want.
- Tel: (760) 250-7888
- Fax: (760) 762-6301
- Email:Click here
- Contact: sales dept
TraceAbility Solutions Inc. Canada
- TraceAbility Solution Series - Document Management and eCommerce software for the Tube and Pipe Industry
- Tel: (780) 413-9828
- Fax: (780) 439-3407
- Email:Click here
- Contact: sales dept
Herne Data Systems Ltd. Canada
- N P S contains data on more than 5700 sizes and types of standard and specialty piping and tubing (from 1/8" to 72" nominal size) in over 35 different materials including metals, plastics and composites.
- Tel: (416) 364-9955
- Fax: (416) 364-9955
- Email:Click here
- Contact: sales dept
Bend-Tech Software MN United States
- Design & layout software for all benders. Easy to use no CAD knowledge needed. Design and develop flat layout in seconds after a half hour training program ...built-in. Software is low cost, pays for itself in the first job.
- Tel: 1-651-257-8715
- Fax: 1-651-257-9051
- Email:Click here
- Contact: Cris Merry
Data Functions TX United States
- Data Functions has a full line of software for the metals industry including our MTR Imaging
System and a full line of accounting packages. Our software can be linked to
your website for access to MTRs by your customers or remote sites.
- Tel: 281-337-9951
- Fax: 281-337-9952
- Email:Click here
- Contact: Larry Stefan
data M Corporation IL United States
- data M Corporation offers tube mill roll design software, finite element analysis software, quality control hardware as well as design- and engineering services to the tube industry.
http://www.data-m.com
- Tel: 630 288-3585
- Email:Click here
- Contact: Albert Sedlmaier
Advanced Tubular Technologies MI United States
- ATT provides software for the tube fab industry. Since 1985 TubeCAD has been the layout package most used by the industry in the US. Also: Benderlink, CNC Bender, TubeCalc, FIF Translator, AutoCAD to Supravision conversion, and other software.
- Tel: 248 674-2059
- Fax: 248 674-2157
- Email:Click here
- Contact: John Esralian
Welding Units (UK) Ltd United Kingdom
- Welding Units supplies free software to flange users. More than 1,000 of our clients are already using this software, which gives a wealth of design and dimensional information for flanges and their materials .
- Tel: + 44 (0) 1744 884881
- Fax: + 44 (0) 1744 883302
- Email:Click here
- Contact: sales dept
Thomson Pettie Group United Kingdom
- Latest software on CNC bending machines
- Tel: +44 1555-771062
- Fax: +44 1555-770455
- Email:Click here
- Contact: sales dept
TeZet Technik AG Switzerland
- Design Tubes Faster in 3D with 6D mouse. Use Design in AutoCAD and CNC Tube Bender. Reverse engineer Existing Tubes and Pipes. Test Collisions Tube/Tube, Tube/BenderTube/Environment. Calculate Compensation for Tube Bender.
- Tel: +41 56 2493760
- Fax: +41 56 2492878
- Email:Click here
- Contact: Sales Dept
| 
