Updated Grinding Machine for Tungsten Welding Electrodes. Following the last 20 years success with the TEG-2 and TEG-3 Tungsten Electrode Grinding Machines, Huntingdon Fusion Techniques Limited has updated the design by changing the grinding head from the three o'clock to the six o'clock position. Key advantages of this change are that dust is no longer thrown upwards towards the operators face while grinding and the operator can now see more clearly how the grinding is progressing. The TEG - 3, continues to be manufactured in the UK to European CE regulations and conforms to all required standards. It has been designed especially for the grinding of tips on tungsten electrodes as used in TIG and Plasma welding. This useful tool will axially grind all diameters tungsten welding electrode from 1.0 to 6.4 mm and lengths down to 15 mm with the aid of the special collet accessory. A long life diamond wheel that gives the equivalent of 3 man years of grinding life is fitted and it is protected by a front cover preventing the grinding of other materials, thus eliminating the risk of contaminating electrodes with other materials, which would transfer to and contaminate the weld pool. A low cost vacuum unit to extract the dust is available for bolting onto the side of the grinder as an accessory. A powerful high speed motor provides the correct speed for diamond grinding of tungsten and is available for use on either 110 volt or 220 volt single phase connection. Further information about this relatively low cost grinder can be obtained from Huntingdon Fusion Techniques Limited, Stukeley Meadow Burry Port, Carms, UK Tel : + 44 (0) 1554 836836 Fax: + 44 (0) 1554 836837 E-mail: Sales@huntingdonfusion.com Web Site: http://www.huntingdonfusion.com

Tel: 0044 (0) 1553 836 836   Fax: 0044 (0) 1553 836 837