CAGIL Edge Milling Machines are increasing weld quality while decreasing scrap percentage with lower cost. Two Edge milling machine orders have been received from UMRAN CELIK BORU no chip problem, edge copying system by clamping the strip edge from three point Separetly. cutter head diameter : 600 mm. capacity : 25 mm from each side while x70 strip is moving 1.6 m/m noise is less than 80 db. x or y welding edge and its parameters can be set from the screen Panel by operator and machine adjust the position of strip Automatically. all movements can be done automatically or under the control of Operator from operator panel. machine delivered as ready to work complete with hydraulic, mcc and Operator panels. chip conveyor is mounted on the machine. For further information please contact: Cagil Makina A.S. - Addr: Ankara yolu 5.km. P.K.:47 19001 CORUM, Turkey - Tel: +90 364 235 01 40 - Fax: +90 364 235 01 39 - http://www.cagilmakina.com - Email: obcagil@cagilmakina.com - Contact: Osman Baki Cagil

Tel: +90 364 2350140   Fax: +90 364 2350139