Main Page
Editor's Page
Industry News
Product News
Tech Info
Marketplace
Tube People
Specifications
New Members
FAQ
Software
Guestbook
Link Club
LME
Currencies
Contact us

Downloads

Machinery
Manufacturers
Main Register

Tube & Pipe
Suppliers
Main Register

TubeNet
US site
Europe site
Asia site
USA: tubenet.org Global: tubenet.org.uk
Wed, Dec 12, 2018, 19:34:46 ---- The fact: 38.682.000 visitors done.

Bronx Taylor Wilson OCTG Tube finishing equipment
Bronx Taylor Wilson
Port Pipe and Tube Inc
Email to Port Pipe and Tube   Banner Advertising    How to remove this banner
[Main Page]       [Send your Press Release on-line]     
[Change/Delete this Press Release] 
[Previous]   [Next]
Company: Bronx Taylor Wilson, UK
Attn: Scott Miller

The strong demand for Bronx Taylor Wilson OCTG Tube finishing equipment continues at an unabated pace, in reality the requirement for their world renowned Tube Straightening and Hydrotesting equipment is seeing a significant upsurge, especially for processing large diameters. One of the largest single orders in the history of Bronx Taylor Wilson has seen a contract signed in Russia for three large Tube Straightening Installations and one Hydrostatic Pipe Testing Installation. All four of these installations will operate out of the Russian Federation and will process high grades of OCTG products according to API and GOST specifications. All of these machines are to be manufactured and delivered during 2007

The first installation is for a Bronx Taylor Wilson 10CR9 series Tube Straightening Installation, a 10 rolls machine that will process Plain End and Upset End Pipes with a maximum diameter 168.3mm at temperatures of up to 660C and grades of API Q125 & S135. The well proven system of Hydraulic Quick Opening allows the machine to straighten the pipes right the way up to the Upset Ends producing perfect results. As with the other Straightening installations in this contract, it will be controlled by the Bronx Patented COMPASS, Computer Aided Setting System, which ensures consistently high levels of efficiency, quality and throughput whoever is the operator. With this system, set up times and changeover times have been significantly reduced with the time to change from minimum to maximum diameter now less than three minutes.

The second installation is for a larger Bronx Taylor Wilson 10CR10 series Tube Straightening Installation, a 10 rolls machine that will process Plain End and Upset End Pipes with a maximum diameter 245mm at hot temperatures and grades of API P110 & S135 and high end GOST standards.

The third installation is a step larger again and is for a Bronx Taylor Wilson 6CR11 series Tube Straightening Installation, a 6 rolls machine that will process Plain End Pipes with a maximum diameter 426mm at temperatures of around 700C and Casing material grades up to API P110.

The fourth installation from this contract is for a Bronx Taylor Wilson Hydrostatic Pipe Testing Installation that will pressure test pipes from 219mm to 340mm diameter with lengths varying from 6 to 13 metres. The machine will offer a rate of 67 pieces per hour at maximum test pressure and with a 10 second hold time. Material grades in API reach Q125 and GOST632-80 T. The maximum test pressure for the installation will be 125MPa resulting in a maximum end load on the machine of around 6800 kN.

Founded in 1896, Bronx/Taylor-Wilson is the renowned leading manufacturer of finishing equipment solutions. The companys product offering includes its famous tube, pipe, bar and section straighteners, hydrostatic pipe testing machines, rotary cut-off and end facing equipment, collapse testing machines, material handling equipment and other ancillary finishing equipment.


     Tel: +44 (0)874422686   Fax: +44 (0)8704422989
[Main Page]       [Send your Press Release on-line]     
[Change/Delete this Press Release] 
[Previous]   [Next]