Main Page
Editor's Page
Industry News
Product News
Tech Info
Marketplace
Tube People
Specifications
New Members
FAQ
Software
Guestbook
Link Club
LME
Currencies
Contact us

Downloads

Machinery
Manufacturers
Main Register

Tube & Pipe
Suppliers
Main Register

TubeNet
US site
Europe site
Asia site
USA: tubenet.org Global: tubenet.org.uk
Mon, Dec 17, 2018, 4:28:51 ---- The fact: 38.682.000 visitors done.

100% In-Line Automatic Tube Length & Ovality Inspection
Haven Manufacturing Corp.
Outokumpu
Email to Outokumpu   Banner Advertising    How to remove this banner
[Main Page]       [Send your Press Release on-line]     
[Change/Delete this Press Release] 
[Previous]   [Next]
Company: Haven Manufacturing Corp., GA, United States
Attn: Alec Banish

Haven Manufacturing Corporation has introduced several new models of 100% in-line, length and ovality inspection machines, versatile enough to accept tubes from any cutoff operation and measure them at line speed. The basic model has one station that measures overall length. A second station can be added to inspect part straightness and ovality.

The machines use either a walking beam design, or a gravity fed incline to transfer the parts through the inspection stations. Parts enter the transfer through either a kick-off or staging station, then through chip blow-out and measuring. Parts are compared to a calibration figure and specific tolerance ranges can be set. Parts that exceed the uppoer or lower tolerance limits are rejected. Printed inspection reports can be added and the data downloaded to a SPC recorder.

Several models are available for tube diameters up to 5.00" (127mm). For length only inspection rates up to 2200 parts per hour can be attained.


     Tel: 912.265.7536   Fax: 912.264.9001
[Main Page]       [Send your Press Release on-line]     
[Change/Delete this Press Release] 
[Previous]   [Next]