Main Page
Editor's Page
Industry News
Product News
Tech Info
Marketplace
Tube People
Specifications
New Members
FAQ
Software
Guestbook
Link Club
LME
Currencies
Contact us

Downloads

Machinery
Manufacturers
Main Register

Tube & Pipe
Suppliers
Main Register

TubeNet
US site
Europe site
Asia site
USA: tubenet.org Global: tubenet.org.uk
Tue, Sep 17, 2019, 18:24:15 ---- The fact: 42.844.000 visitors done.

Wanted Tube and Pipe
Africa & Middle-East

When making a new posting you can now add a picture too
Northwest Pipe Company
Email to Nortwest Pipe Company   Banner Advertising    How to remove this banner
[Main Page]       [New message]     
[Change/renew this message] 
[Previous]   [Next]
Company: Syroplan Industrial Consulting Co., Syria
Attn: Mr. Sami Huda
Seamless cold drawn low carbon steel tubes for tubular heat exchanger and condensers of freezing and refrigerating machines and similar heat transfer apparatus.
Quantity: 10 m/t.
Outside diameter: 5mm.
Wall thickness: 0.75mm
Legth: coiled.
Manufacture: cold drawn.
Test report required: Section 23.2 of specification A450 according to ASTM standard.
Tubes should be treated after the final cold drawn pass at a remperature of 650c or higher.
Surface condition: finished tubes should be clean and free from any scales, oxidations and deformations.
Chemical requirements: The steel should conform to the following requirements as to chemical composition:
Carbon 0.06 0.18%.
Manganese: 0.27 0.63%
Sulphur: Max. 0.058 phosphorous max 0.048%.
Hardness requirements: The tubes should have a rockwell hardness number not exceeding B72.


  Tel: (021) 572 8881   Fax: (021) 572 0241
[Main Page]       [New message]     
[Change/Renew this message] 
[Previous]   [Next]
Copyright © Juha Haapala. All rights reserved.






























.